HHB comm HHB MDP500 Manuel d'utilisateur télécharger pdf (Page 7)

1 BATTERY COMPARTMENT

This cover slides off (from right to left in this

view) and underneath is the battery caddy,

holding 8 x AA batteries.

2 KEYHOLD

Use this button to avoid any accidental operation

during recording. Each time you press the button

for more than two seconds, the hold function

changes from ‘Key Hold ON’ to ‘Key Hold OFF’ and

vice versa. The following buttons can still operate

even when the keyhold function is on: KEY HOLD,

LIGHT, MARK, DISPLAY and POWER. The remote

control connection will not be affected by this

function; i.e., it is always enabled.

3 OPEN

Press this button to eject the MD disc. This

function is disabled during recording.

4 EDIT

Use this button to enter the different edit modes.

5 AMS

Use the button to move back one or more

tracks and the button to move forward one

or more tracks. These buttons are also used in

editing and naming.

6 REWIND

Rewinds the track during playback.

7 PLAY

Use this button to start playing back the track.

8 FAST FORWARD

Fast forwards the track during playback.

9 STOP

Use this button to stop the playback or recording

operation.

10 RECORD VOLUME CONTROL

Dual concentric control for independent left and

right level adjustment.

11 INTERNAL MONO MICROPHONE

12 MONITOR SPEAKER

13 SHOULDER STRAP ATTACHMENT POINTS

TOP PANEL

PORTADISC MDP500 MiniDisc Recorder

FRONT PANEL

PORTADISC MDP500 MiniDisc Recorder

14 PHONE LEVEL

Adjusts the volume level for the headphones and

monitor speaker. The control will pop out if you

press it. The monitor speaker will not function

during recording or when the headphones are

connected.

15 INPUT

Changes the following input related settings:

• Input source: MIC, LINE, DIGITAL, INT MIC, OFF

• Options for MIC: MIC-Att, BASSCUT, LIMITER,

PHANTOM

• Options for LINE: LIMITER

• Options for DIGITAL: COAXIAL, OPTICAL, USB

input connections

16 DISPLAY

Changes the display menu through disc time, level

margin, time & date.

17 LIGHT

Illuminates the display back light for a few seconds.

Hold it down for more than two seconds in order

for it to be continuously lit. Press it again to switch

off the light.

18 MARK

Marks the track number manually during record

mode and play/pause mode.

19 SYSTEM

Changes the following system settings: REC MODE,

TRACK-INCREMENT, THRESHOLD LEVEL,

AUTO-START/CUT, AUTO-PAUSE, PRE-RECORD,

HEADPHONE MONITOR, OVERWRITE MODE,

REPEAT MODE, DIGITAL OUTPUT and AUTO

POWER DOWN.

20 SETUP

Changes the following setup options: OPEN SETUP,

SAVE SETUP, CLOCK/DATE SETUP, DATE FORMAT,

PEAK HOLD METER and DISPLAY CONTRAST. Use

this button to save and recall set-ups. OPEN SETUP

consists of five user set-ups, which can be used to

store all the menu settings on the recorder, and

three recording presets – MIC REC, LINE REC and

DIGI REC.

21 REC LEVEL

Adjusts the analog recording level manually for mic

and line inputs. This control does not affect the

signal level when the AGC function is set to ‘ON’.

The outer control adjusts the left hand channel and

the inner control adjusts the right hand channel. A

friction lock between the two controls allows them

to move together but also be adjusted individually.

22 RECORD

Slide this button to the right to enter record mode.

23 POWER

Press this button for one second to power ON and

press for more than one second then release to

power OFF. This button does not turn the power off

during recording and TOC operations.

24 F1, F2, F3

Selects the parameters according to the

corresponding set-up functions on the display above.

25 LCD DISPLAY

Shows level metering, disc information, timing

information and all the menu select and control

displays.

26 REC LEVEL LOCK

Mechanically locks the REC LEVEL knob position in

order to avoid accidental adjustment. Slide this

button up to lock.

27 REC INDICATOR

This LED will light up red in record mode and blink

in record pause mode.

28 BAT CHG INDICATOR

This LED will light up green when charging the

NiMH rechargeable batteries.

29 PAUSE INDICATOR

This LED will light up yellow in pause mode.

30 PAUSE BUTTON

Use this button to pause the record or playback

operation. Pressing this button before pressing the

record button will put the recorder into record

pause mode, ready for recording.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

HHB comm HHB MDP500 Manuel d'utilisateur Page 7

Commentaires sur ces manuels