HHB comm HHB MDP500 Manuel d'utilisateur télécharger pdf (Page 22)

3. The display will repeatedly show the following

messages one after another:

The PORTADISC will playback the audio at the

dividing point repeatedly. If the audio plays from the

correct point, skip to point 5 in this list.

4. It is possible to adjust the divide point in 0.06

second steps by pressing either the

FF button or

REW buttons repeatedly. The adjustment range is

from -128 to +127 within a track.

5. Press F2 to confirm.

6. The divide process has been completed and

‘Complete!’ will be shown on the display. The

PORTADISC will now start audio playback from the

divided position. If the original undivided track had a

track name, the track after the divide process will

not have a name.

NOTE – If you want to cancel the divide function in the

middle of the procedure, press either

F3 or the STOP

button. You can return the divided track back to its

original status by using the combine function.

This function combines two adjacent tracks into one

track. This is useful when you want to combine short

sections of recorded tracks into one. If you wish to

combine two non-adjacent tracks, you first need to

move them so they are next to each other using the

move function (see next column).

This example illustrates combining tracks 2 and 3:

Track number 1 2 3 4

Track content A B C D

COMBINE

New track content A B+C D

1. During stop mode, press the

EDIT button until

‘COMBINE?’ is displayed.

2. Press

F1 to select the first track number of the

two adjacent tracks that you want to combine

(track 2 in this example). Then press

F2 to set-up.

3. The display will now show the following messages:

one after another:

The PORTADISC will playback the end of the first

track (TRK002) and the beginning of the second

track (TRK003) repeatedly. If you are happy with

the sound played back, skip to point 5 in this list.

4. If the PORTADISC is not playing back the correct

point in the audio, press either

F3 or STOP to

cancel the function. Then, start the procedure

again from point 1.

5. Press

F2 to confirm.

6. The combining process has been completed and

‘Complete!’ will be shown on the display. The

PORTADISC will now start playing back the audio

from the beginning of the combined tracks. If the

first track before the combine process had a track

name, this will now become the name of the

combined track. The name of the second track will

be deleted.

NOTE – If you want to cancel the COMBINE function in

the middle of the procedure, press either

F3 or STOP

You can return the combined tracks back to their original

status as separate tracks by using the divide function. If

‘Impossible!’ is shown on the display, you cannot use the

combine function with the two tracks you have chosen.

Due to a natural limitation of the MD system, you may

not be able to use the combine function if you have used

it too many times before.

You can move a particular track to anywhere on the disc

simply by changing the track order. The track numbers will

be automatically re-aligned so that all the tracks have

continuous numbers in numerical order.

This example illustrates moving track C to between tracks

A and B.

Track number 1 2 3 4

Track contents A B C D

MOVE

New track contents A C B D

1. During stop mode, press the

EDIT button until

‘MOVE >> ?’ is displayed.

EDITING cont.

PORTADISC MDP500 MiniDisc Recorder

Rehearsal ! RH

TRK001+000 YES EXIT

Track OK ! RH

TRK001+000 YES EXIT

COMBINE ?

TRK002 YES EXIT

Track OK ! RH

TRK002 YES EXIT

Rehearsal ! RH

TRK002 YES EXIT

MOVE >> ?

TRK003 YES TRK002

COMBINE FUNCTION

MOVE FUNCTION

PDISC_OP.QXD 6/11/00 12:44 pm Page 23

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

HHB comm HHB MDP500 Manuel d'utilisateur Page 22

Commentaires sur ces manuels